INSTRUCTIONS
- Thread the needle and bobbin with sewing thread
- Insert the adjustable bias binder foot.
- Adjust the width of the bias opening with the screw on the right side of the bracket.
- Cut the end of the bias tape at 45°. Insert the bias tape from the end of the bracket into the groove of the corresponding width and pull it under the presser foot.
- Place the edge to be finished in the groove to the left of the shank.
- Loosen the screw at the top on the back of the foot and adjust the bracket.
- Select a narrow zigzag stitch, a straight stitch or a decorative stitch. Sew slowly, keeping the fabric to be finished snug against the groove.
Adjustable Husqvarna bias binding foot
Vendor: Husqvarna
SKU: ACCU_1954
Code 412985045
Create beautiful finished hems with your favourite bias tape.
Adjust the foot to sew bias tapes of different widths, from 6 to 20 mm.
Sale price
$41.00
Regular price
$45.00
Pickup available at corso cavour 178
Usually ready in 24 hours
Adjustable Husqvarna bias binding foot
-
corso cavour 178
Pickup availableUsually ready in 24 hours
Corso Cavour 178
19121 La Spezia SP
Italy+390187735108
INSTRUCTIONS
- Thread the needle and bobbin with sewing thread
- Insert the adjustable bias binder foot.
- Adjust the width of the bias opening with the screw on the right side of the bracket.
- Cut the end of the bias tape at 45°. Insert the bias tape from the end of the bracket into the groove of the corresponding width and pull it under the presser foot.
- Place the edge to be finished in the groove to the left of the shank.
- Loosen the screw at the top on the back of the foot and adjust the bracket.
- Select a narrow zigzag stitch, a straight stitch or a decorative stitch. Sew slowly, keeping the fabric to be finished snug against the groove.